D-handle design with ergonomic rubber grip for in-line operation for maximum power and comfort. One touch sliding chuck for easy bit installation.

Hammer drill.
Rotary drill.
Chisel.

Standard Equipment;
Charger, Battery cartridge, Depth Gauge, and side Handle.

Max in Steel: 13mm
Max in Wood: 27mm
Max in Concrete: 20mm
Joules: 2.1js
No Load Speed: 0-1,100rpm
Blows per minute: 0-4,700bpm
Net Weight: 4.1kg
Charging Time: 1 Hour

Drill mode plus 16 torque settings on screwdriver mode for versatility.Single sleeve keyless chuck with shaft lock for fast and easy bit changes.

Standard Equipment;
Charger, battery cartridge, side handle, depth stop, 2 x double ended bit.

Max in Steel: 13mm
Max in Wood: 38mm
Torque Settings; S/H Nm: 16; 30/70
Max Size Wood Screw: 10x90mm
Max Size Machine Screw: 6mm
No Load Speed: Hi 0-1,500rpm/Low 0-460rpm
Net Weight: 2.6kg
Charging Time: 1 Hour

More power and longer run time with 24V Ni-MH battery. Drill mode plus 16 torque settings on screwdriver mode for versatility. Single-sleeve keyless chuck with shaft lock for fast and easy one handed bit changes.

Standard Equipment;
Charger, battery catridge, side handle, depth stop, 2 x screwdriver bits.

Max in Steel: 13mm
Max in Wood: 38mm
Max in Masonry: 16mm
Torque Settings S/H Nm: 16; 30/70
Max Size Wood Screw: 10x90mm
Max Size Machine Screw: 6mm
No Load Speed: Hi 0-1,500rpm - Low 0-460rpm
Blows per minute: Hi 0-22,500bpm - Low 0-6,900bpm
Net Weight: 2.7kg

Incredibly low vibration thanks to the counterbalancing gear unit, and intelligent battery technology. Max cut: 90mm in pipe and wood. Tool-less blade change and shoe adjustment.

Max cut: 90mm.
Tool-less blade change.

Standard Equipment;
Charger, battery cartridge.

Max Cut in Wood: 90mm
Max Cut in Pipe: 90mm
Length of Stroke: 32mm
Strokes per minute: Low 0-2,300spm-Hi 0-2,700spm
Net Weight: 4.7kg

Powerful 24V Ni-MH battery for longer run time. Large aluminum wraparound base for stability.

50º bevel capacity with positive stop at 45º.
Huge 185mm blade cuts 2" x 4" materials even at 50º.
Max cut: 66mm at 90º.
Electric brake.

Standard Equipment;
Charger, battery cartridge, TCT saw blade, rip fence, and hex wrench.

Cutting Range @ 90°: 0-66mm
Max Cut @45°: 0-47mm
Max Cut @ 50°: 0-42mm
Blade Diameter: 190mm
No Load Speed: 2,400rpm
Net Weight: 4.7kg
Charging Time: 1 Hour

Palm-fitting soft grip for superior handling. 200Nm (Hi) or 150Nm (Lo) of fastening torque. Intelligent battery technology.

Aluminum hammer case.
12.7mm square drive.

Standard Equipment;
Charger, battery cartridge.

Torque Settings; S/H Nm: Hi 200Nm - Lo 150Nm
Drive: 1/2" Square
Standard Bolt: M10-M16
No Load Speed: Hi 0-2,000rpm - Lo 0-1,600rpm
Impacts/Minute: Hi 0-3,000ipm - Lo 0-2,500ipm
Net Weight: 3.3kg
Charging Time: 1 Hour